Eagleflo Rubber Gasoline Dispensing Hose Assembly, 3/4″ 10′

This Eagleflo rubber gasoline dispensing hose assembly has a 3/4″ ID, a 1.13″ OD, and is 10′ long. It is suitable for dispensing gasoline or other petroleum-based fluids from service station pumps. Its black nitrile tube resists aromatic compounds and has a Rubber Manufacturers Association (RMA) Class A rating, which means that it will undergo a maximum volume change of +25% and will retain at least 80% of its tensile strength after exposure to oil, and its black CPE (chlorinated polyethylene) cover resists ozone, weathering, oil, chemicals, and flame. This hose is reinforced with braided, high tensile steel wire for a maximum pressure rating of 150 pounds per square inch (psi) and full vacuum rating of 30″ Hg. It can withstand temperatures ranging from -40 to +120 degrees F (-40 to +49 degrees C), meets Underwriter’s Laboratories (UL) Standard 300 and Underwriter’s Laboratories of Canada (CUL) standards for dispensing flammable liquids, and comes equipped with two 3/4″ factory-installed chrome-plated brass male National Pipe Taper (NPT) threaded fittings. This hose is suitable for conveying gasoline and other petroleum-based fluids in a wide range of commercial, industrial, and agricultural applications.

Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system. In this case, hose selection must ensure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Industrial hoses are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.